InstrumentsPressure and temperature measurementT +49 40 5247 4156 · M +49 176 3130 5711sales@eurekaeu.com
Pressure gauges on gauge valves in a process plant hall

Home / Applications / Process

Industry · Process

Instruments for pipelines, vessels, pumps and filters

Liquid-filled pressure gauges, diaphragm seals for aggressive or viscous media, pressure transmitters, pressure switches, thermometers and Pt100 sensors – for power plants, chemical works, hydraulic installations, paper mills and gas control equipment. Specified to your medium and connection – and quoted by us.

  • Gauges from −1 to 1600 bar
  • Diaphragms in PTFE, Hastelloy, Tantalum and more
  • Flanges to DIN, ANSI and ISO
  • Safety-pattern gauges to EN 837-1
−1 … 1600 barpressure gauge ranges
Class 1.0gauge accuracy (DN 63: 1.6)
PN 40e.g. DIN flange seals, DN 25 and DN 80
−80 … +500 °Cdial thermometer range

Requirements

What a process plant asks of an instrument

Medium, temperature and the process connection decide the instrument. These are the points we check with you before we quote – all values from the manufacturer’s material.

01

Where they are used

  • Pumps, vessels, pipelines, filters, actuators, switchgear, hydraulic cylinders and casting moulds
  • Power plants, offshore installations, chemical works, paper mills, gas control equipment and petrochemical plants
02

Aggressive, hot or viscous media

  • A diaphragm seal keeps the medium away from the measuring element
  • Stainless steel diaphragms as standard; PTFE, Viton, Kalrez, Hastelloy, Tantalum and others to suit the medium
  • Seals and instruments filled with transmission liquid under vacuum
03

Process connections

  • Flanges to DIN 2501, DIN 2635 and ANSI B16.5, e.g. 150 lb 3" and 300 lb 2"
  • Dairy thread DIN 11851, clamp ISO 2852, in-line and pancake designs
  • Seals produced to DIN, ANSI, ISO, ASME and other standards
04

Ranges and accuracy

  • Pressure gauges −1 bar to 1600 bar, class 1.0 (DN 63: 1.6)
  • Low-pressure gauges with a stainless bellows system
  • Differential pressure gauges and transmitters
05

Signals and switching

  • Pressure transmitters with thin-film sensor, zero and span adjustable
  • Pressure gauge with 4–20 mA output
  • Pressure switches, differential pressure switches and safety pressure switches
06

Safety pattern

  • Safety-pattern gauges with blow-out back to EN 837-1, clause 9.7.2
  • Other explosion-protection requirements are confirmed per enquiry
✓

Documentation

Tell us which certificates and documents your plant needs. We confirm per model what can be supplied and state it in the quotation.

In service

Where process instruments work

Pressure gauge on a gauge valve at an outdoor pipe rack
Pipe rack with local gauges
Pressure gauge with bar scale on a process line
EN 837-1 pressure gauge
Pressure gauges upstream and downstream of a valve on a process pipeline
Gauges on a valve station
Pump room of a water-treatment plant with process pumps, filters and local gauges
Process pump room
Pressure gauge at a row of pneumatic control valves
Valve actuators and impulse lines

Photos show typical installations. Image credits.

Typical applications

How instruments are typically used in process plants

Two common scenarios. They describe typical installations, not a specific plant or customer.

Pressure gauge on a process line
Scenario 1

Pump with a viscous or corrosive medium

On a pump handling a viscous or corrosive medium, the measuring element should not be in contact with the product.

  1. A diaphragm seal with a DIN or ANSI flange separates the medium from the gauge.
  2. The gauge reads locally at the pump; a transmitter with flush diaphragm seal sends the value to the control system.
  3. A pressure switch can stop the pump at a set pressure.

What we need from you: medium and temperature, range, flange standard and size, diaphragm material and output.

Pressure gauges upstream and downstream of a valve on a process pipeline
Scenario 2

Differential pressure across a filter

A rising differential pressure shows when a filter needs cleaning.

  1. A differential pressure gauge shows the pressure drop across the filter on site.
  2. A differential pressure transmitter or switch passes the value or an alarm to the control system.
  3. Range and connection are chosen to the operating pressure of the filter.

What we need from you: medium, operating pressure, differential range, connection and output.

Engineering

Technical notes and common faults

General engineering points we check with you. They are not a guarantee for a specific installation.

Clogged or corroded measuring element

Viscous, crystallising or aggressive media block or attack a Bourdon tube. A diaphragm seal keeps the medium away from the element.

Overrange

A range too close to the working pressure shortens the life of the gauge. State working pressure, peaks and overpressure separately.

Heat at the instrument

Hot media can overheat the gauge or transmitter. Process temperature decides whether a seal or a longer connection is needed.

Documents

Datasheet with the quotation. Calibration documents and, where available for the product type, certificates are confirmed per model. Resources and checklists →

Why FEX

What you get with us

Seal and gauge from one manufacturer

The diaphragm seal and the gauge are made by the same manufacturer, so the two parts are designed to work together.

Calibrated one by one

Each pressure gauge is calibrated manually and individually at five points on the scale, upwards and downwards. Bourdon tubes are heat-treated to reduce hysteresis.

Built to your specification

Standard products and customer-specified versions come from one modular system – ranges, threads, fills and mounting to suit the measuring point.

One contact in Hamburg

Selection, quotation, documentation, shipping to your site and after-sales – coordinated from Hamburg.

Send us your process specification

  1. Medium, temperature and viscosity
  2. Range and unit
  3. Process connection and standard
  4. Diaphragm or wetted material
  5. Output: dial, signal or contacts
  6. Quantity and delivery country

Ready to specify an instrument?

Send us the measuring point and requirements – we reply with a written quotation and the matching datasheet.

FEX Global · Am Kaiserkai 13, 20457 Hamburg · T +49 40 5247 4156 · M +49 176 3130 5711 · sales@eurekaeu.com